ControlBoard_nwc_yarp: The client side of the control board, connects to a remote controlboard using the YARP network.
More...
#include <networkWrappers/controlBoard_nwc_yarp/ControlBoard_nwc_yarp.h>
Inheritance diagram for ControlBoard_nwc_yarp:Public Member Functions | |
| ControlBoard_nwc_yarp ()=default | |
| ControlBoard_nwc_yarp (const ControlBoard_nwc_yarp &)=delete | |
| ControlBoard_nwc_yarp (ControlBoard_nwc_yarp &&)=delete | |
| ControlBoard_nwc_yarp & | operator= (const ControlBoard_nwc_yarp &)=delete |
| ControlBoard_nwc_yarp & | operator= (ControlBoard_nwc_yarp &&)=delete |
| ~ControlBoard_nwc_yarp () override=default | |
| bool | open (Searchable &config) override |
| Open the DeviceDriver. | |
| bool | close () override |
| Close the device driver and stop the port connections. | |
| yarp::dev::ReturnValue | getAxes (size_t &ax) override |
| Get the number of controlled axes. | |
| yarp::dev::ReturnValue | getAvailablePids (int j, std::vector< yarp::dev::PidControlTypeEnum > &avail) override |
| Return a list of available pid types mode for the given joint. | |
| yarp::dev::ReturnValue | setPid (const PidControlTypeEnum &pidtype, int j, const Pid &pid) override |
| Set new PID value for a joint axis. | |
| yarp::dev::ReturnValue | setPids (const PidControlTypeEnum &pidtype, const Pid *pids) override |
| Set new PID value on multiple axes. | |
| yarp::dev::ReturnValue | setPidReference (const PidControlTypeEnum &pidtype, int j, double ref) override |
| Set the controller reference for a given axis. | |
| yarp::dev::ReturnValue | setPidReferences (const PidControlTypeEnum &pidtype, const double *refs) override |
| Set the controller reference, multiple axes. | |
| yarp::dev::ReturnValue | setPidErrorLimit (const PidControlTypeEnum &pidtype, int j, double limit) override |
| Set the error limit for the controller on a specific joint. | |
| yarp::dev::ReturnValue | setPidErrorLimits (const PidControlTypeEnum &pidtype, const double *limits) override |
| Get the error limit for the controller on all joints. | |
| yarp::dev::ReturnValue | getPidError (const PidControlTypeEnum &pidtype, int j, double *err) override |
| Get the current error for a joint. | |
| yarp::dev::ReturnValue | getPidErrors (const PidControlTypeEnum &pidtype, double *errs) override |
| Get the error of all joints. | |
| yarp::dev::ReturnValue | getPid (const PidControlTypeEnum &pidtype, int j, Pid *pid) override |
| Get current PID value for a specific joint. | |
| yarp::dev::ReturnValue | getPids (const PidControlTypeEnum &pidtype, Pid *pids) override |
| Get current PID value for a specific joint. | |
| yarp::dev::ReturnValue | getPidReference (const PidControlTypeEnum &pidtype, int j, double *ref) override |
| Get the current reference of the PID controller for a specific joint. | |
| yarp::dev::ReturnValue | getPidReferences (const PidControlTypeEnum &pidtype, double *refs) override |
| Get the current reference of all PID controllers. | |
| yarp::dev::ReturnValue | getPidErrorLimit (const PidControlTypeEnum &pidtype, int j, double *limit) override |
| Get the error limit for the controller on a specific joint. | |
| yarp::dev::ReturnValue | getPidErrorLimits (const PidControlTypeEnum &pidtype, double *limits) override |
| Get the error limit for all controllers. | |
| yarp::dev::ReturnValue | resetPid (const PidControlTypeEnum &pidtype, int j) override |
| Reset the controller of a given joint, usually sets the current status of the joint as the reference value for the PID, and resets the integrator. | |
| yarp::dev::ReturnValue | disablePid (const PidControlTypeEnum &pidtype, int j) override |
| Disable the PID computation for a joint. | |
| yarp::dev::ReturnValue | enablePid (const PidControlTypeEnum &pidtype, int j) override |
| Enable the PID computation for a joint. | |
| yarp::dev::ReturnValue | isPidEnabled (const PidControlTypeEnum &pidtype, int j, bool &enabled) override |
| Get the current status (enabled/disabled) of the PID. | |
| yarp::dev::ReturnValue | getPidOutput (const PidControlTypeEnum &pidtype, int j, double *out) override |
| Get the output of the controller (e.g. | |
| yarp::dev::ReturnValue | getPidOutputs (const PidControlTypeEnum &pidtype, double *outs) override |
| Get the output of the controllers (e.g. | |
| yarp::dev::ReturnValue | setPidOffset (const PidControlTypeEnum &pidtype, int j, double v) override |
| Set an offset value for a given controller. | |
| yarp::dev::ReturnValue | setPidFeedforward (const PidControlTypeEnum &pidtype, int j, double v) override |
| Set the feedforward value for the specified PID controller. | |
| yarp::dev::ReturnValue | getPidOffset (const PidControlTypeEnum &pidtype, int j, double &v) override |
| Get the currently set offset value for the specified PID controller. | |
| yarp::dev::ReturnValue | getPidFeedforward (const PidControlTypeEnum &pidtype, int j, double &v) override |
| Get the currently set feedforward value for the specified PID controller. | |
| yarp::dev::ReturnValue | getPidExtraInfo (const PidControlTypeEnum &pidtype, int j, PidExtraInfo &info) override |
| Get PID extra info and measurement units for a specific joint. | |
| yarp::dev::ReturnValue | getPidExtraInfos (const PidControlTypeEnum &pidtype, std::vector< PidExtraInfo > &info) override |
| Get PID extra info and measurement units for a specific joint. | |
| yarp::dev::ReturnValue | resetEncoder (int j) override |
| Reset encoder, single joint. | |
| yarp::dev::ReturnValue | resetEncoders () override |
| Reset encoders. | |
| yarp::dev::ReturnValue | setEncoder (int j, double val) override |
| Set the value of the encoder for a given joint. | |
| yarp::dev::ReturnValue | setEncoders (const double *vals) override |
| Set the value of all encoders. | |
| yarp::dev::ReturnValue | getEncoder (int j, double *v) override |
| Read the value of an encoder. | |
| yarp::dev::ReturnValue | getEncoderTimed (int j, double *v, double *t) override |
| Read the instantaneous acceleration of all axes. | |
| yarp::dev::ReturnValue | getEncoders (double *encs) override |
| Read the position of all axes. | |
| yarp::dev::ReturnValue | getEncodersTimed (double *encs, double *ts) override |
| Read the instantaneous acceleration of all axes. | |
| yarp::dev::ReturnValue | getEncoderSpeed (int j, double *sp) override |
| Read the istantaneous speed of an axis. | |
| yarp::dev::ReturnValue | getEncoderSpeeds (double *spds) override |
| Read the instantaneous speed of all axes. | |
| yarp::dev::ReturnValue | getEncoderAcceleration (int j, double *acc) override |
| Read the instantaneous acceleration of an axis. | |
| yarp::dev::ReturnValue | getEncoderAccelerations (double *accs) override |
| Read the instantaneous acceleration of all axes. | |
| yarp::dev::ReturnValue | getRemoteVariable (std::string key, yarp::os::Bottle &val) override |
| yarp::dev::ReturnValue | setRemoteVariable (std::string key, const yarp::os::Bottle &val) override |
| yarp::dev::ReturnValue | getRemoteVariablesList (yarp::os::Bottle *listOfKeys) override |
| yarp::dev::ReturnValue | getNumberOfMotors (int *num) override |
| Get the number of available motors. | |
| yarp::dev::ReturnValue | getTemperature (int m, double *val) override |
| Get temperature of a motor. | |
| yarp::dev::ReturnValue | getTemperatures (double *vals) override |
| Get temperature of all the motors. | |
| yarp::dev::ReturnValue | getTemperatureLimit (int m, double *val) override |
| Retrieves the current temperature limit for a specific motor. | |
| yarp::dev::ReturnValue | setTemperatureLimit (int m, const double val) override |
| Set the temperature limit for a specific motor. | |
| yarp::dev::ReturnValue | getGearboxRatio (int m, double *val) override |
| Get the gearbox ratio for a specific motor. | |
| yarp::dev::ReturnValue | setGearboxRatio (int m, const double val) override |
| Set the gearbox ratio for a specific motor. | |
| yarp::dev::ReturnValue | resetMotorEncoder (int j) override |
| Reset motor encoder, single motor. | |
| yarp::dev::ReturnValue | resetMotorEncoders () override |
| Reset motor encoders. | |
| yarp::dev::ReturnValue | setMotorEncoder (int j, const double val) override |
| Set the value of the motor encoder for a given motor. | |
| yarp::dev::ReturnValue | setMotorEncoderCountsPerRevolution (int m, const double cpr) override |
| Sets number of counts per revolution for motor encoder m. | |
| yarp::dev::ReturnValue | getMotorEncoderCountsPerRevolution (int m, double *cpr) override |
| Gets number of counts per revolution for motor encoder m. | |
| yarp::dev::ReturnValue | setMotorEncoders (const double *vals) override |
| Set the value of all motor encoders. | |
| yarp::dev::ReturnValue | getMotorEncoder (int j, double *v) override |
| Read the value of a motor encoder. | |
| yarp::dev::ReturnValue | getMotorEncoderTimed (int j, double *v, double *t) override |
| Read the instantaneous position of a motor encoder. | |
| yarp::dev::ReturnValue | getMotorEncoders (double *encs) override |
| Read the position of all motor encoders. | |
| yarp::dev::ReturnValue | getMotorEncodersTimed (double *encs, double *ts) override |
| Read the instantaneous position of all motor encoders. | |
| yarp::dev::ReturnValue | getMotorEncoderSpeed (int j, double *sp) override |
| Read the instantaneous speed of a motor encoder. | |
| yarp::dev::ReturnValue | getMotorEncoderSpeeds (double *spds) override |
| Read the instantaneous speed of all motor encoders. | |
| yarp::dev::ReturnValue | getMotorEncoderAcceleration (int j, double *acc) override |
| Read the instantaneous acceleration of a motor encoder. | |
| yarp::dev::ReturnValue | getMotorEncoderAccelerations (double *accs) override |
| Read the instantaneous acceleration of all motor encoders. | |
| yarp::dev::ReturnValue | getNumberOfMotorEncoders (int *num) override |
| Get the number of available motor encoders. | |
| Stamp | getLastInputStamp () override |
| Get the time stamp for the last read data. | |
| yarp::dev::ReturnValue | positionMove (int j, double ref) override |
| Set new reference point for a single axis. | |
| yarp::dev::ReturnValue | positionMove (const int n_joint, const int *joints, const double *refs) override |
| Set new reference point for a subset of joints. | |
| yarp::dev::ReturnValue | positionMove (const double *refs) override |
| Set new reference point for all axes. | |
| yarp::dev::ReturnValue | getTargetPosition (const int joint, double *ref) override |
| Get the last position reference for the specified axis. | |
| yarp::dev::ReturnValue | getTargetPositions (double *refs) override |
| Get the last position reference for all axes. | |
| yarp::dev::ReturnValue | getTargetPositions (const int n_joint, const int *joints, double *refs) override |
| Get the last position reference for the specified group of axes. | |
| yarp::dev::ReturnValue | relativeMove (int j, double delta) override |
| Set relative position. | |
| yarp::dev::ReturnValue | relativeMove (const int n_joint, const int *joints, const double *refs) override |
| Set relative position for a subset of joints. | |
| yarp::dev::ReturnValue | relativeMove (const double *deltas) override |
| Set relative position, all joints. | |
| yarp::dev::ReturnValue | checkMotionDone (int j, bool &flag) override |
| Check if the current trajectory is terminated. | |
| yarp::dev::ReturnValue | checkMotionDone (const std::vector< int > &joints, bool &flag) override |
| Check if the current trajectory is terminated. | |
| yarp::dev::ReturnValue | checkMotionDone (bool &flag) override |
| Check if the current trajectory is terminated. | |
| yarp::dev::ReturnValue | setTrajSpeed (int j, double sp) override |
| Set reference speed for a joint, this is the speed used during the interpolation of the trajectory. | |
| yarp::dev::ReturnValue | setTrajSpeeds (const int n_joint, const int *joints, const double *spds) override |
| Set reference speed on all joints. | |
| yarp::dev::ReturnValue | setTrajSpeeds (const double *spds) override |
| Set reference speed on all joints. | |
| yarp::dev::ReturnValue | setTrajAcceleration (int j, double acc) override |
| Set reference acceleration for a joint. | |
| yarp::dev::ReturnValue | setTrajAccelerations (const int n_joint, const int *joints, const double *accs) override |
| Set reference acceleration on all joints. | |
| yarp::dev::ReturnValue | setTrajAccelerations (const double *accs) override |
| Set reference acceleration on all joints. | |
| yarp::dev::ReturnValue | getTrajSpeed (int j, double *ref) override |
| Get reference speed for a joint. | |
| yarp::dev::ReturnValue | getTrajSpeeds (const int n_joint, const int *joints, double *spds) override |
| Get reference speed of all joints. | |
| yarp::dev::ReturnValue | getTrajSpeeds (double *spds) override |
| Get reference speed of all joints. | |
| yarp::dev::ReturnValue | getTrajAcceleration (int j, double *acc) override |
| Get reference acceleration for a joint. | |
| yarp::dev::ReturnValue | getTrajAccelerations (const int n_joint, const int *joints, double *accs) override |
| Get reference acceleration for a joint. | |
| yarp::dev::ReturnValue | getTrajAccelerations (double *accs) override |
| Get reference acceleration of all joints. | |
| yarp::dev::ReturnValue | stop (int j) override |
| Stop motion, single joint. | |
| yarp::dev::ReturnValue | stop (const int len, const int *joints) override |
| Stop motion for subset of joints. | |
| yarp::dev::ReturnValue | stop () override |
| Stop motion, multiple joints. | |
| yarp::dev::ReturnValue | getLastJointFault (int j, int &fault, std::string &message) override |
| yarp::dev::ReturnValue | enableAmp (int j) override |
| Enable the amplifier on a specific joint. | |
| yarp::dev::ReturnValue | disableAmp (int j) override |
| Disable the amplifier on a specific joint. | |
| yarp::dev::ReturnValue | getAmpStatus (int *st) override |
| yarp::dev::ReturnValue | getAmpStatus (int j, int *st) override |
| yarp::dev::ReturnValue | setMaxCurrent (int j, double v) override |
| yarp::dev::ReturnValue | getMaxCurrent (int j, double *v) override |
| Returns the maximum electric current allowed for a given motor. | |
| yarp::dev::ReturnValue | getNominalCurrent (int m, double *val) override |
| yarp::dev::ReturnValue | setNominalCurrent (int m, const double val) override |
| yarp::dev::ReturnValue | getPeakCurrent (int m, double *val) override |
| yarp::dev::ReturnValue | setPeakCurrent (int m, const double val) override |
| yarp::dev::ReturnValue | getPWM (int m, double *val) override |
| yarp::dev::ReturnValue | getPWMLimit (int m, double *val) override |
| yarp::dev::ReturnValue | setPWMLimit (int m, const double val) override |
| yarp::dev::ReturnValue | getPowerSupplyVoltage (int m, double *val) override |
| yarp::dev::ReturnValue | setPosLimits (int axis, double min, double max) override |
| Set the software limits for a particular axis, the behavior of the control card when these limits are exceeded, depends on the implementation. | |
| yarp::dev::ReturnValue | getPosLimits (int axis, double *min, double *max) override |
| Get the software limits for a particular axis. | |
| yarp::dev::ReturnValue | setVelLimits (int axis, double min, double max) override |
| Set the software speed limits for a particular axis, the behavior of the control card when these limits are exceeded, depends on the implementation. | |
| yarp::dev::ReturnValue | getVelLimits (int axis, double *min, double *max) override |
| Get the software speed limits for a particular axis. | |
| yarp::dev::ReturnValue | getAxisName (int j, std::string &name) override |
| yarp::dev::ReturnValue | getJointType (int j, yarp::dev::JointTypeEnum &type) override |
| yarp::dev::ReturnValue | calibrateRobot () override |
| Calibrate robot by using an external calibrator. | |
| yarp::dev::ReturnValue | abortCalibration () override |
| yarp::dev::ReturnValue | abortPark () override |
| yarp::dev::ReturnValue | park (bool wait=true) override |
| yarp::dev::ReturnValue | calibrateAxisWithParams (int j, unsigned int ui, double v1, double v2, double v3) override |
| Start calibration, this method is very often platform specific. | |
| yarp::dev::ReturnValue | setCalibrationParameters (int j, const CalibrationParameters ¶ms) override |
| Start calibration, this method is very often platform specific. | |
| yarp::dev::ReturnValue | calibrationDone (int j) override |
| Check if the calibration is terminated, on a particular joint. | |
| yarp::dev::ReturnValue | getRefTorque (int j, double *t) override |
| Get the reference value of the torque for a given joint. | |
| yarp::dev::ReturnValue | getRefTorques (double *t) override |
| Get the reference value of the torque for all joints. | |
| yarp::dev::ReturnValue | setRefTorques (const double *t) override |
| Set the reference value of the torque for all joints. | |
| yarp::dev::ReturnValue | setRefTorque (int j, double v) override |
| Set the reference value of the torque for a given joint. | |
| yarp::dev::ReturnValue | setRefTorques (const int n_joint, const int *joints, const double *t) override |
| Set new torque reference for a subset of joints. | |
| yarp::dev::ReturnValue | setMotorTorqueParams (int j, const MotorTorqueParameters params) override |
| Set a subset of motor parameters (bemf, ktau etc) useful for torque control. | |
| yarp::dev::ReturnValue | getMotorTorqueParams (int j, MotorTorqueParameters *params) override |
| Get a subset of motor parameters (bemf, ktau etc) useful for torque control. | |
| yarp::dev::ReturnValue | getTorque (int j, double *t) override |
| Get the value of the torque on a given joint (this is the feedback if you have a torque sensor). | |
| yarp::dev::ReturnValue | getTorques (double *t) override |
| Get the value of the torque for all joints (this is the feedback if you have torque sensors). | |
| yarp::dev::ReturnValue | getTorqueRange (int j, double *min, double *max) override |
| Get the full scale of the torque sensor of a given joint. | |
| yarp::dev::ReturnValue | getTorqueRanges (double *min, double *max) override |
| Get the full scale of the torque sensors of all joints. | |
| yarp::dev::ReturnValue | getImpedance (int j, double *stiffness, double *damping) override |
| Get current impedance gains (stiffness,damping,offset) for a specific joint. | |
| yarp::dev::ReturnValue | getImpedanceOffset (int j, double *offset) override |
| Get current force Offset for a specific joint. | |
| yarp::dev::ReturnValue | setImpedance (int j, double stiffness, double damping) override |
| Set current impedance gains (stiffness,damping) for a specific joint. | |
| yarp::dev::ReturnValue | setImpedanceOffset (int j, double offset) override |
| Set current force Offset for a specific joint. | |
| yarp::dev::ReturnValue | getCurrentImpedanceLimit (int j, double *min_stiff, double *max_stiff, double *min_damp, double *max_damp) override |
| Get the current impedance limits for a specific joint. | |
| yarp::dev::ReturnValue | getAvailableControlModes (int j, std::vector< yarp::dev::SelectableControlModeEnum > &avail) override |
| Return a list of available control mode for the given joint. | |
| yarp::dev::ReturnValue | getControlMode (int j, yarp::dev::ControlModeEnum &mode) override |
| Get the current control mode. | |
| yarp::dev::ReturnValue | getControlModes (const std::vector< int > &joints, std::vector< yarp::dev::ControlModeEnum > &modes) override |
| Get the current control mode for a subset of axes. | |
| yarp::dev::ReturnValue | getControlModes (std::vector< yarp::dev::ControlModeEnum > &modes) override |
| Get the current control mode (multiple joints). | |
| yarp::dev::ReturnValue | setControlMode (int j, yarp::dev::SelectableControlModeEnum mode) override |
| Set the current control mode. | |
| yarp::dev::ReturnValue | setControlModes (const std::vector< int > &joints, const std::vector< yarp::dev::SelectableControlModeEnum > &modes) override |
| Set the current control mode for a subset of axes. | |
| yarp::dev::ReturnValue | setControlModes (const std::vector< yarp::dev::SelectableControlModeEnum > &modes) override |
| Set the current control mode (multiple joints). | |
| yarp::dev::ReturnValue | setPosition (int j, double ref) override |
| Set new position for a single axis. | |
| yarp::dev::ReturnValue | setPositions (const int n_joint, const int *joints, const double *refs) override |
| Set new reference point for all axes. | |
| yarp::dev::ReturnValue | setPositions (const double *refs) override |
| Set new position for a set of axis. | |
| yarp::dev::ReturnValue | getRefPosition (const int joint, double *ref) override |
| Get the last position reference for the specified axis. | |
| yarp::dev::ReturnValue | getRefPositions (double *refs) override |
| Get the last position reference for all axes. | |
| yarp::dev::ReturnValue | getRefPositions (const int n_joint, const int *joints, double *refs) override |
| Get the last position reference for the specified group of axes. | |
| yarp::dev::ReturnValue | velocityMove (int j, double v) override |
| Start motion at a given speed, single joint. | |
| yarp::dev::ReturnValue | velocityMove (const double *v) override |
| Start motion at a given speed, multiple joints. | |
| yarp::dev::ReturnValue | velocityMove (const int n_joint, const int *joints, const double *spds) override |
| Start motion at a given speed for a subset of joints. | |
| yarp::dev::ReturnValue | getTargetVelocity (const int joint, double *vel) override |
| Get the last reference speed set by velocityMove for single joint. | |
| yarp::dev::ReturnValue | getTargetVelocities (double *vels) override |
| Get the last reference speed set by velocityMove for all joints. | |
| yarp::dev::ReturnValue | getTargetVelocities (const int n_joint, const int *joints, double *vels) override |
| Get the last reference speed set by velocityMove for a group of joints. | |
| yarp::dev::ReturnValue | getInteractionMode (int axis, yarp::dev::InteractionModeEnum &mode) override |
| Get the current interaction mode of the robot, values can be stiff or compliant. | |
| yarp::dev::ReturnValue | getInteractionModes (const std::vector< int > &joints, std::vector< yarp::dev::InteractionModeEnum > &modes) override |
| Get the current interaction mode of the robot for a set of joints, values can be stiff or compliant. | |
| yarp::dev::ReturnValue | getInteractionModes (std::vector< yarp::dev::InteractionModeEnum > &modes) override |
| Get the current interaction mode of the robot for a all the joints, values can be stiff or compliant. | |
| yarp::dev::ReturnValue | setInteractionMode (int axis, yarp::dev::InteractionModeEnum mode) override |
| Set the interaction mode of the robot, values can be stiff or compliant. | |
| yarp::dev::ReturnValue | setInteractionModes (const std::vector< int > &joints, const std::vector< yarp::dev::InteractionModeEnum > &modes) override |
| Set the interaction mode of the robot for a set of joints, values can be stiff or compliant. | |
| yarp::dev::ReturnValue | setInteractionModes (const std::vector< yarp::dev::InteractionModeEnum > &modes) override |
| Set the interaction mode of the robot for a all the joints, values can be stiff or compliant. | |
| yarp::dev::ReturnValue | isCalibratorDevicePresent (bool *isCalib) override |
| isCalibratorDevicePresent: check if a calibrator device has been set | |
| yarp::dev::ReturnValue | calibrateSingleJoint (int j) override |
| calibrateSingleJoint: call the calibration procedure for the single joint | |
| yarp::dev::ReturnValue | calibrateWholePart () override |
| calibrateWholePart: call the procedure for calibrating the whole device | |
| yarp::dev::ReturnValue | homingSingleJoint (int j) override |
| homingSingleJoint: call the homing procedure for a single joint | |
| yarp::dev::ReturnValue | homingWholePart () override |
| homingWholePart: call the homing procedure for a the whole part/device | |
| yarp::dev::ReturnValue | parkSingleJoint (int j, bool _wait=true) override |
| parkSingleJoint(): start the parking procedure for the single joint | |
| yarp::dev::ReturnValue | parkWholePart () override |
| parkWholePart: start the parking procedure for the whole part | |
| yarp::dev::ReturnValue | quitCalibrate () override |
| quitCalibrate: interrupt the calibration procedure | |
| yarp::dev::ReturnValue | quitPark () override |
| quitPark: interrupt the park procedure | |
| yarp::dev::ReturnValue | getRefCurrents (double *t) override |
| Get the reference value of the currents for all motors. | |
| yarp::dev::ReturnValue | getRefCurrent (int j, double *t) override |
| Get the reference value of the current for a single motor. | |
| yarp::dev::ReturnValue | setRefCurrents (const double *refs) override |
| Set the reference value of the currents for all motors. | |
| yarp::dev::ReturnValue | setRefCurrent (int j, double ref) override |
| Set the reference value of the current for a single motor. | |
| yarp::dev::ReturnValue | setRefCurrents (const int n_joint, const int *joints, const double *refs) override |
| Set the reference value of the current for a group of motors. | |
| yarp::dev::ReturnValue | getCurrents (double *vals) override |
| yarp::dev::ReturnValue | getCurrent (int j, double *val) override |
| yarp::dev::ReturnValue | getCurrentRange (int j, double *min, double *max) override |
| Get the full scale of the current measurement for a given motor (e.g. | |
| yarp::dev::ReturnValue | getCurrentRanges (double *min, double *max) override |
| Get the full scale of the current measurements for all motors motor (e.g. | |
| yarp::dev::ReturnValue | setRefDutyCycle (int j, double v) override |
| Sets the reference dutycycle to a single motor. | |
| yarp::dev::ReturnValue | setRefDutyCycles (const double *v) override |
| Sets the reference dutycycle for all the motors. | |
| yarp::dev::ReturnValue | getRefDutyCycle (int j, double *ref) override |
| Gets the last reference sent using the setRefDutyCycle function. | |
| yarp::dev::ReturnValue | getRefDutyCycles (double *refs) override |
| Gets the last reference sent using the setRefDutyCycles function. | |
| yarp::dev::ReturnValue | getDutyCycle (int j, double *out) override |
| Gets the current dutycycle of the output of the amplifier (i.e. | |
| yarp::dev::ReturnValue | getDutyCycles (double *outs) override |
| Gets the current dutycycle of the output of the amplifier (i.e. | |
| yarp::dev::ReturnValue | isJointBraked (int j, bool &braked) const override |
| Check is the joint brake is currently active. | |
| yarp::dev::ReturnValue | setManualBrakeActive (int j, bool active) override |
| Enables/Disables manually the joint brake. | |
| yarp::dev::ReturnValue | setAutoBrakeEnabled (int j, bool enabled) override |
| Enables/Disables the automatic joint brake. | |
| yarp::dev::ReturnValue | getAutoBrakeEnabled (int j, bool &enabled) const override |
| checks if the automatic joint brake mode is enabled or disabled. | |
| yarp::dev::ReturnValue | setRefVelocity (int jnt, double vel) override |
| Set the velocity of single joint. | |
| yarp::dev::ReturnValue | setRefVelocity (const std::vector< double > &vels) override |
| Set the velocity of all joints. | |
| yarp::dev::ReturnValue | setRefVelocity (const std::vector< int > &jnts, const std::vector< double > &vels) override |
| Set the velocity of a subset of joints. | |
| yarp::dev::ReturnValue | getRefVelocity (const int jnt, double &vel) override |
| Get the last reference velocity set by setRefVelocity() for a single joint. | |
| yarp::dev::ReturnValue | getRefVelocity (std::vector< double > &vels) override |
| Get the last reference velocity set by setRefVelocity() for all joints. | |
| yarp::dev::ReturnValue | getRefVelocity (const std::vector< int > &jnts, std::vector< double > &vels) override |
| Get the last reference velocity set by setRefVelocity() for a group of joints. | |
Public Member Functions inherited from yarp::dev::IPidControl | |
| virtual | ~IPidControl () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IPositionControl | |
| virtual | ~IPositionControl () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IVelocityControl | |
| virtual | ~IVelocityControl () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IEncodersTimed | |
| virtual | ~IEncodersTimed () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IEncoders | |
| virtual | ~IEncoders () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IMotorEncoders | |
| virtual | ~IMotorEncoders () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IMotor | |
| virtual | ~IMotor () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IAmplifierControl | |
| virtual | ~IAmplifierControl () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IControlLimits | |
| virtual | ~IControlLimits () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IAxisInfo | |
| virtual | ~IAxisInfo () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IPreciselyTimed | |
| virtual | ~IPreciselyTimed () |
Public Member Functions inherited from yarp::dev::IControlCalibration | |
| IControlCalibration () | |
| virtual | ~IControlCalibration () |
| Destructor. | |
| virtual yarp::dev::ReturnValue | setCalibrator (ICalibrator *c) |
| Set the calibrator object to be used to calibrate the robot. | |
Public Member Functions inherited from yarp::dev::ITorqueControl | |
| virtual | ~ITorqueControl () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IImpedanceControl | |
| virtual | ~IImpedanceControl () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IControlMode | |
| virtual | ~IControlMode () |
| virtual yarp::dev::ReturnValue | getControlMode (int j, int *mode) |
| virtual yarp::dev::ReturnValue | setControlMode (const int j, const int mode) |
Public Member Functions inherited from yarp::dev::DeviceDriver | |
| DeviceDriver () | |
| DeviceDriver (const DeviceDriver &other)=delete | |
| DeviceDriver (DeviceDriver &&other) noexcept=delete | |
| DeviceDriver & | operator= (const DeviceDriver &other)=delete |
| DeviceDriver & | operator= (DeviceDriver &&other) noexcept=delete |
| virtual | ~DeviceDriver () |
| virtual std::string | id () const |
| Return the id assigned to the PolyDriver. | |
| virtual void | setId (const std::string &id) |
| Set the id for this device. | |
| template<class T > | |
| bool | view (T *&x) |
| Get an interface to the device driver. | |
| virtual DeviceDriver * | getImplementation () |
| Some drivers are bureaucrats, pointing at others. | |
Public Member Functions inherited from yarp::dev::IPositionDirect | |
| virtual | ~IPositionDirect () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IVelocityDirect | |
| virtual | ~IVelocityDirect () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IInteractionMode | |
| virtual | ~IInteractionMode () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IRemoteCalibrator | |
| IRemoteCalibrator () | |
| This interface is meant to remotize the access of the calibration device in order to allow users to remotely call the calibration procedure for a single joint or the whole device and let the calibrator do the job. | |
| virtual | ~IRemoteCalibrator ()=default |
| virtual yarp::dev::ReturnValue | setCalibratorDevice (yarp::dev::IRemoteCalibrator *dev) |
| setCalibratorDevice: store the pointer to the calibrator device. | |
| virtual yarp::dev::IRemoteCalibrator * | getCalibratorDevice () |
| getCalibratorDevice: return the pointer stored with the setCalibratorDevice | |
| virtual yarp::dev::ReturnValue | releaseCalibratorDevice () |
| releaseCalibratorDevice: reset the internal pointer to NULL when stop using the calibrator | |
Public Member Functions inherited from yarp::dev::IRemoteVariables | |
| virtual | ~IRemoteVariables () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IPWMControl | |
| virtual | ~IPWMControl () |
Public Member Functions inherited from yarp::dev::ICurrentControl | |
| virtual | ~ICurrentControl () |
| Destructor. | |
Public Member Functions inherited from yarp::dev::IJointFault | |
| virtual | ~IJointFault () |
Public Member Functions inherited from yarp::dev::IJointBrake | |
| virtual | ~IJointBrake () |
Public Member Functions inherited from ControlBoard_nwc_yarp_ParamsParser | |
| ControlBoard_nwc_yarp_ParamsParser () | |
| ~ControlBoard_nwc_yarp_ParamsParser () override=default | |
| bool | parseParams (const yarp::os::Searchable &config) override |
| Parse the DeviceDriver parameters. | |
| std::string | getDeviceClassName () const override |
| Get the name of the DeviceDriver class. | |
| std::string | getDeviceName () const override |
| Get the name of the device (i.e. | |
| std::string | getDocumentationOfDeviceParams () const override |
| Get the documentation of the DeviceDriver's parameters. | |
| std::vector< std::string > | getListOfParams () const override |
| Return a list of all params used by the device. | |
| bool | getParamValue (const std::string ¶mName, std::string ¶mValue) const override |
| Return the value (represented as a string) of the requested parameter. | |
| std::string | getConfiguration () const override |
| Return the configuration of the device. | |
Public Member Functions inherited from yarp::dev::IDeviceDriverParams | |
| virtual | ~IDeviceDriverParams () |
Protected Member Functions | |
| bool | isLive () |
Protected Attributes | |
| yarp::os::Port | command_p |
| DiagnosticThread * | diagnosticThread {nullptr} |
| yarp::os::Port | m_rpcPort |
| yarp::os::PortWriterBuffer< yarp::dev::CommandMessageData > | command_buffer |
| bool | writeStrict_singleJoint {true} |
| bool | writeStrict_moreJoints {false} |
| std::map< std::string, bool > | m_device_has_interfaces |
| StateExtendedInputPort | extendedIntputStatePort |
| std::mutex | extendedPortMutex |
| yarp::dev::JointStateData | last_singleJoint |
| yarp::dev::JointStateData | last_wholePart |
| Stamp | m_lastStamp |
| size_t | m_nj {0} |
| bool | m_njIsKnown {false} |
| ControlBoardMsgs | m_RPC |
Additional Inherited Members | |
Public Attributes inherited from ControlBoard_nwc_yarp_ParamsParser | |
| const std::string | m_device_classname = {"ControlBoard_nwc_yarp"} |
| const std::string | m_device_name = {"controlBoard_nwc_yarp"} |
| bool | m_parser_is_strict = false |
| const parser_version_type | m_parser_version = {} |
| std::string | m_provided_configuration |
| const std::string | m_remote_defaultValue = {""} |
| const std::string | m_local_defaultValue = {""} |
| const std::string | m_writeStrict_defaultValue = {""} |
| const std::string | m_carrier_defaultValue = {"fast_tcp"} |
| const std::string | m_carrier_cmd_defaultValue = {"fast_tcp"} |
| const std::string | m_timeout_defaultValue = {"0.5"} |
| const std::string | m_use_streaming_defaultValue = {"true"} |
| const std::string | m_local_qos_enable_defaultValue = {"false"} |
| const std::string | m_local_qos_thread_priority_defaultValue = {"0"} |
| const std::string | m_local_qos_thread_policy_defaultValue = {"0"} |
| const std::string | m_local_qos_packet_priority_defaultValue = {""} |
| const std::string | m_remote_qos_enable_defaultValue = {"false"} |
| const std::string | m_remote_qos_thread_priority_defaultValue = {"0"} |
| const std::string | m_remote_qos_thread_policy_defaultValue = {"0"} |
| const std::string | m_remote_qos_packet_priority_defaultValue = {""} |
| const std::string | m_diagnostic_defaultValue = {"false"} |
| std::string | m_remote = {} |
| std::string | m_local = {} |
| std::string | m_writeStrict = {} |
| std::string | m_carrier = {"fast_tcp"} |
| std::string | m_carrier_cmd = {"fast_tcp"} |
| float | m_timeout = {0.5} |
| bool | m_use_streaming = {true} |
| bool | m_local_qos_enable = {false} |
| int | m_local_qos_thread_priority = {0} |
| int | m_local_qos_thread_policy = {0} |
| std::string | m_local_qos_packet_priority = {} |
| bool | m_remote_qos_enable = {false} |
| int | m_remote_qos_thread_priority = {0} |
| int | m_remote_qos_thread_policy = {0} |
| std::string | m_remote_qos_packet_priority = {} |
| bool | m_diagnostic = {false} |
ControlBoard_nwc_yarp: The client side of the control board, connects to a remote controlboard using the YARP network.
This device communicates using the YARP ports opened the controlBoard_nws_yarp device to use a device exposing controlboard method even from a different process (or even computer) from the one that opened the controlboard device.
Parameters required by this device are shown in class: ControlBoard_nwc_yarp_ParamsParser
Definition at line 56 of file ControlBoard_nwc_yarp.h.
|
default |
|
delete |
|
delete |
|
overridedefault |
|
overridevirtual |
Reimplemented from yarp::dev::IControlCalibration.
Definition at line 1833 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Reimplemented from yarp::dev::IControlCalibration.
Definition at line 1844 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Start calibration, this method is very often platform specific.
Implements yarp::dev::IControlCalibration.
Definition at line 1866 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Calibrate robot by using an external calibrator.
The external calibrator must be previously set by calling the setCalibration() method.
Reimplemented from yarp::dev::IControlCalibration.
Definition at line 1822 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
calibrateSingleJoint: call the calibration procedure for the single joint
| j | joint to be calibrated |
Implements yarp::dev::IRemoteCalibrator.
Definition at line 2596 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
calibrateWholePart: call the procedure for calibrating the whole device
Implements yarp::dev::IRemoteCalibrator.
Definition at line 2607 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Check if the calibration is terminated, on a particular joint.
Non blocking.
Implements yarp::dev::IControlCalibration.
Definition at line 1895 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Check if the current trajectory is terminated.
Non blocking.
| flag | is a pointer to return value ("and" of all joints) |
Implements yarp::dev::IPositionControl.
Definition at line 1305 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Check if the current trajectory is terminated.
Non blocking.
| joints | array of joint numbers |
| flag | logical "and" of all set of joints |
Implements yarp::dev::IPositionControl.
Definition at line 1293 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Check if the current trajectory is terminated.
Non blocking.
| j | is the axis number |
| flag | is a pointer to return value |
Implements yarp::dev::IPositionControl.
Definition at line 1281 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Close the device driver and stop the port connections.
Reimplemented from yarp::dev::DeviceDriver.
Definition at line 341 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Disable the amplifier on a specific joint.
All computations within the board will be carried out normally, but the output will be disabled.
Implements yarp::dev::IAmplifierControl.
Definition at line 1591 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Disable the PID computation for a joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
Implements yarp::dev::IPidControl.
Definition at line 570 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Enable the amplifier on a specific joint.
Be careful, check that the output of the controller is appropriate (usually zero), to avoid generating abrupt movements.
Implements yarp::dev::IAmplifierControl.
Definition at line 1580 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Enable the PID computation for a joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
Implements yarp::dev::IPidControl.
Definition at line 581 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1602 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1614 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
checks if the automatic joint brake mode is enabled or disabled.
| j | joint number |
| enabled | is true the automatic joint brake mode is enabled |
Implements yarp::dev::IJointBrake.
Definition at line 2994 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Return a list of available control mode for the given joint.
| j | joint number |
| avail | a vector that will contain the list of available control modes for joint j. |
Implements yarp::dev::IControlMode.
Definition at line 2191 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Return a list of available pid types mode for the given joint.
| j | joint number |
| avail | a vector that will contain the list of available control modes for joint j. |
Implements yarp::dev::IPidControl.
Definition at line 382 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the number of controlled axes.
This command asks the number of controlled axes for the current physical interface.
| ax | pointer to storage |
Implements yarp::dev::IPositionControl.
Definition at line 3008 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAxisInfo.
Definition at line 1795 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current control mode.
| j | joint number |
| mode | a vocab of the current control mode for joint j. |
Implements yarp::dev::IControlMode.
Definition at line 2203 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current control mode for a subset of axes.
| n_joints | how many joints this command is referring to |
| joints | list of joint numbers, the size of this array is n_joints |
| modes | array containing the new controlmodes, one value for each joint, the size is n_joints. The first value will be the new reference for the joint joints[0]. for example: n_joint 3 joints 0 2 4 modes VOCAB_CM_POSITION VOCAB_CM_VELOCITY VOCAB_CM_POSITION |
Implements yarp::dev::IControlMode.
Definition at line 2232 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current control mode (multiple joints).
| modes | a vector containing vocabs for the current control modes of the joints. |
Implements yarp::dev::IControlMode.
Definition at line 2214 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 2816 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current impedance limits for a specific joint.
Implements yarp::dev::IImpedanceControl.
Definition at line 2172 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the full scale of the current measurement for a given motor (e.g.
-20A +20A) Reference values set by user with methods such as setRefCurrent() should be in this range. This method is not related to the current overload protection methods belonging to the iAmplifierControl interface.
| m | motor number |
| min | minimum current of the motor m |
| max | maximum current of the motor m |
Implements yarp::dev::ICurrentControl.
Definition at line 2843 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the full scale of the current measurements for all motors motor (e.g.
-20A +20A) Reference values set by user with methods such as setRefCurrent() should be in this range. This method is not related to the current overload protection methods belonging to the iAmplifierControl interface.
| min | pointer to the array that will store minimum currents |
| max | pointer to the array that will store maximum currents |
Implements yarp::dev::ICurrentControl.
Definition at line 2856 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 2789 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Gets the current dutycycle of the output of the amplifier (i.e.
pwm value sent to the motor)
| m | motor number |
| val | pointer to storage for return value, expressed as percentage (-100% +100%) |
Implements yarp::dev::IPWMControl.
Definition at line 2940 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Gets the current dutycycle of the output of the amplifier (i.e.
pwm values sent to all motors)
| vals | pointer to the vector that will store the values, expressed as percentage (-100% +100%) |
Implements yarp::dev::IPWMControl.
Definition at line 2949 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the value of an encoder.
| j | encoder number |
| v | pointer to storage for the return value |
Implements yarp::dev::IEncoders.
Definition at line 787 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous acceleration of an axis.
| j | axis number |
| spds | pointer to the array that will contain the output |
Implements yarp::dev::IEncoders.
Definition at line 849 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous acceleration of all axes.
| accs | pointer to the array that will contain the output |
Implements yarp::dev::IEncoders.
Definition at line 858 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the position of all axes.
| encs | pointer to the array that will contain the output |
Implements yarp::dev::IEncoders.
Definition at line 808 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the istantaneous speed of an axis.
| j | axis number |
| sp | pointer to storage for the output |
Implements yarp::dev::IEncoders.
Definition at line 829 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous speed of all axes.
| spds | pointer to storage for the output values |
Implements yarp::dev::IEncoders.
Definition at line 839 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous acceleration of all axes.
| encs | pointer to the array that will contain the output |
| time | pointer to the array that will contain individual timestamps |
Implements yarp::dev::IEncodersTimed.
Definition at line 818 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous acceleration of all axes.
| j | axis index |
| encs | encoder value (pointer to) |
| time | corresponding timestamp (pointer to) |
Implements yarp::dev::IEncodersTimed.
Definition at line 797 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the gearbox ratio for a specific motor.
| m | motor number |
| val | retrieved gearbox ratio |
Implements yarp::dev::IMotor.
Definition at line 966 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get current impedance gains (stiffness,damping,offset) for a specific joint.
Implements yarp::dev::IImpedanceControl.
Definition at line 2125 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get current force Offset for a specific joint.
Implements yarp::dev::IImpedanceControl.
Definition at line 2138 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current interaction mode of the robot, values can be stiff or compliant.
| axis | joint number |
| mode | contains the requested information about interaction mode of the joint |
Implements yarp::dev::IInteractionMode.
Definition at line 2502 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current interaction mode of the robot for a set of joints, values can be stiff or compliant.
| n_joints | how many joints this command is referring to |
| joints | list of joints controlled. The size of this array is n_joints |
| modes | array containing the requested information about interaction mode, one value for each joint, the size is n_joints. for example: n_joint 3 joints 0 2 4 refs VOCAB_IM_STIFF VOCAB_IM_STIFF VOCAB_IM_COMPLIANT |
Implements yarp::dev::IInteractionMode.
Definition at line 2513 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current interaction mode of the robot for a all the joints, values can be stiff or compliant.
| mode | array containing the requested information about interaction mode, one value for each joint. |
Implements yarp::dev::IInteractionMode.
Definition at line 2532 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Reimplemented from yarp::dev::IAxisInfo.
Definition at line 1807 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the time stamp for the last read data.
Implements yarp::dev::IPreciselyTimed.
Definition at line 1159 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IJointFault.
Definition at line 1500 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Returns the maximum electric current allowed for a given motor.
Exceeding this value will trigger instantaneous hardware fault.
| j | motor number |
| v | the return value |
Implements yarp::dev::IAmplifierControl.
Definition at line 1637 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the value of a motor encoder.
| m | motor encoder number |
| v | pointer to storage for the return value |
Implements yarp::dev::IMotorEncoders.
Definition at line 1061 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous acceleration of a motor encoder.
| m | motor number |
| acc | pointer to the array that will contain the output |
Implements yarp::dev::IMotorEncoders.
Definition at line 1121 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous acceleration of all motor encoders.
| accs | pointer to the array that will contain the output |
Implements yarp::dev::IMotorEncoders.
Definition at line 1130 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Gets number of counts per revolution for motor encoder m.
| m | motor number |
| cpr | vals pointer to the new value |
Implements yarp::dev::IMotorEncoders.
Definition at line 1037 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the position of all motor encoders.
| encs | pointer to the array that will contain the output |
Implements yarp::dev::IMotorEncoders.
Definition at line 1082 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous speed of a motor encoder.
| m | motor number |
| sp | pointer to storage for the output |
Implements yarp::dev::IMotorEncoders.
Definition at line 1103 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous speed of all motor encoders.
| spds | pointer to storage for the output values |
Implements yarp::dev::IMotorEncoders.
Definition at line 1112 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous position of all motor encoders.
| encs | pointer to the array that will contain the output |
| time | pointer to the array that will contain individual timestamps |
Implements yarp::dev::IMotorEncoders.
Definition at line 1092 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Read the instantaneous position of a motor encoder.
| m | motor index |
| encs | encoder value (pointer to) |
| time | corresponding timestamp (pointer to) |
Implements yarp::dev::IMotorEncoders.
Definition at line 1071 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get a subset of motor parameters (bemf, ktau etc) useful for torque control.
| j | joint number |
| params | a struct containing the motor parameters to be retrieved |
Implements yarp::dev::ITorqueControl.
Definition at line 2057 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1649 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the number of available motor encoders.
| m | pointer to a value representing the number of available motor encoders. |
Implements yarp::dev::IMotorEncoders.
Definition at line 1139 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the number of available motors.
| num | retrieved number of available motors |
Implements yarp::dev::IMotor.
Definition at line 911 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1672 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get current PID value for a specific joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| pid | pointer to storage for the return value. |
Implements yarp::dev::IPidControl.
Definition at line 487 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current error for a joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| err | pointer to the storage for the return value |
Implements yarp::dev::IPidControl.
Definition at line 463 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the error limit for the controller on a specific joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| limit | pointer to storage |
Implements yarp::dev::IPidControl.
Definition at line 535 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the error limit for all controllers.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| limits | pointer to the array that will store the output |
Implements yarp::dev::IPidControl.
Definition at line 547 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the error of all joints.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| errs | pointer to the vector that will store the errors |
Implements yarp::dev::IPidControl.
Definition at line 475 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get PID extra info and measurement units for a specific joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| info | the measurement units for the specified PID. |
Implements yarp::dev::IPidControl.
Definition at line 690 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get PID extra info and measurement units for a specific joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| info | vector that will store the info about of the pids. |
Implements yarp::dev::IPidControl.
Definition at line 702 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the currently set feedforward value for the specified PID controller.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| v | the feedforward value |
Implements yarp::dev::IPidControl.
Definition at line 726 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the currently set offset value for the specified PID controller.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| v | the offset value |
Implements yarp::dev::IPidControl.
Definition at line 714 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the output of the controller (e.g.
pwm value)
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| out | pointer to storage for return value |
Implements yarp::dev::IPidControl.
Definition at line 604 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the output of the controllers (e.g.
pwm value)
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| outs | pointer to the vector that will store the output values |
Implements yarp::dev::IPidControl.
Definition at line 616 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current reference of the PID controller for a specific joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| ref | pointer to storage for return value |
Implements yarp::dev::IPidControl.
Definition at line 511 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current reference of all PID controllers.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| refs | vector that will store the output. |
Implements yarp::dev::IPidControl.
Definition at line 523 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get current PID value for a specific joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| pids | vector that will store the values of the pids. |
Implements yarp::dev::IPidControl.
Definition at line 499 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the software limits for a particular axis.
| axis | joint number |
| pointer | to store the value of the lower limit |
| pointer | to store the value of the upper limit |
Implements yarp::dev::IControlLimits.
Definition at line 1754 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1727 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1695 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1704 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the reference value of the current for a single motor.
| m | motor number |
| curr | the current reference value for motor m. Value is expressed in amperes. |
Implements yarp::dev::ICurrentControl.
Definition at line 2700 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the reference value of the currents for all motors.
| currs | pointer to the array to be filled with reference current values. Values are expressed in amperes. |
Implements yarp::dev::ICurrentControl.
Definition at line 2688 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Gets the last reference sent using the setRefDutyCycle function.
| m | motor number |
| ref | pointer to storage for return value, expressed as percentage (-100% +100%) |
Implements yarp::dev::IPWMControl.
Definition at line 2916 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Gets the last reference sent using the setRefDutyCycles function.
| refs | pointer to the vector that will store the values, expressed as percentage (-100% +100%) |
Implements yarp::dev::IPWMControl.
Definition at line 2928 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last position reference for the specified axis.
This is the dual of setPositionsRaw and shall return only values sent using IPositionDirect interface. If other interfaces like IPositionControl are implemented by the device, this call must ignore their values, i.e. this call must never return a reference sent using IPositionControl::PositionMove.
| ref | last reference sent using setPosition(s) functions |
Implements yarp::dev::IPositionDirect.
Definition at line 2384 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last position reference for the specified group of axes.
This is the dual of setPositionsRaw and shall return only values sent using IPositionDirect interface. If other interfaces like IPositionControl are implemented by the device, this call must ignore their values, i.e. this call must never return a reference sent using IPositionControl::PositionMove.
| ref | array containing last reference sent using setPosition(s) functions |
Implements yarp::dev::IPositionDirect.
Definition at line 2408 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last position reference for all axes.
This is the dual of setPositionsRaw and shall return only values sent using IPositionDirect interface. If other interfaces like IPositionControl are implemented by the device, this call must ignore their values, i.e. this call must never return a reference sent using IPositionControl::PositionMove.
| ref | array containing last reference sent using setPosition(s) functions |
Implements yarp::dev::IPositionDirect.
Definition at line 2396 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the reference value of the torque for a given joint.
This is NOT the feedback (see getTorque instead).
| j | joint number |
| t | the returned reference torque of joint j |
Implements yarp::dev::ITorqueControl.
Definition at line 1910 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the reference value of the torque for all joints.
This is NOT the feedback (see getTorques instead).
| t | pointer to the array of torque values |
Implements yarp::dev::ITorqueControl.
Definition at line 1922 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last reference velocity set by setRefVelocity() for a single joint.
| jnt | joint number |
| vel | returns the velocity reference for the specified joint. |
Implements yarp::dev::IVelocityDirect.
Definition at line 3117 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last reference velocity set by setRefVelocity() for a group of joints.
| jnts | vector containing the ids of the joints to control. |
| vels | vector containing the velocity references of the joints belonging to the required subset. |
Implements yarp::dev::IVelocityDirect.
Definition at line 3141 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last reference velocity set by setRefVelocity() for all joints.
| vels | vector containing the velocity references of all joints. |
Implements yarp::dev::IVelocityDirect.
Definition at line 3129 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IRemoteVariables.
Definition at line 871 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IRemoteVariables.
Definition at line 895 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last position reference for the specified axis.
This is the dual of PositionMove and shall return only values sent using IPositionControl interface. If other interfaces like IPositionDirect are implemented by the device, this call must ignore their values, i.e. this call must never return a reference sent using IPositionDirect::SetPosition
| ref | last reference sent using PositionMove functions |
Implements yarp::dev::IPositionControl.
Definition at line 1208 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last position reference for the specified group of axes.
This is the dual of PositionMove and shall return only values sent using IPositionControl interface. If other interfaces like IPositionDirect are implemented by the device, this call must ignore their values, i.e. this call must never return a reference sent using IPositionDirect::SetPosition
| ref | last reference sent using PositionMove functions |
Implements yarp::dev::IPositionControl.
Definition at line 1232 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last position reference for all axes.
This is the dual of PositionMove and shall return only values sent using IPositionControl interface. If other interfaces like IPositionDirect are implemented by the device, this call must ignore their values, i.e. this call must never return a reference sent using IPositionDirect::SetPosition
| ref | last reference sent using PositionMove functions |
Implements yarp::dev::IPositionControl.
Definition at line 1220 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last reference speed set by velocityMove for a group of joints.
| n_joint | how many joints this command is referring to |
| joints | of joints controlled. The size of this array is n_joints |
| vels | pointer to the array containing the requested values, one value for each joint. The size of the array is n_joints. |
Implements yarp::dev::IVelocityControl.
Definition at line 2485 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last reference speed set by velocityMove for all joints.
| vels | pointer to the array containing the new speed values, one value for each joint |
Implements yarp::dev::IVelocityControl.
Definition at line 2473 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the last reference speed set by velocityMove for single joint.
| j | joint number |
| vel | returns the requested reference. |
Implements yarp::dev::IVelocityControl.
Definition at line 2461 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get temperature of a motor.
| m | motor number |
| val | retrieved motor temperature |
Implements yarp::dev::IMotor.
Definition at line 923 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Retrieves the current temperature limit for a specific motor.
The specific behavior of the motor when the temperature limit is exceeded depends on the implementation (power off recommended)
| m | motor number |
| temp | the current temperature limit. |
Implements yarp::dev::IMotor.
Definition at line 943 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get temperature of all the motors.
| vals | pointer to an array containing all motor temperatures |
Implements yarp::dev::IMotor.
Definition at line 933 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the value of the torque on a given joint (this is the feedback if you have a torque sensor).
| j | joint number |
| t | pointer to the result value |
Implements yarp::dev::ITorqueControl.
Definition at line 2077 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the full scale of the torque sensor of a given joint.
| j | joint number |
| min | minimum torque of the joint j |
| max | maximum torque of the joint j |
Implements yarp::dev::ITorqueControl.
Definition at line 2095 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the full scale of the torque sensors of all joints.
| min | pointer to the array that will store minimum torques of the joints |
| max | pointer to the array that will store maximum torques of the joints |
Implements yarp::dev::ITorqueControl.
Definition at line 2108 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the value of the torque for all joints (this is the feedback if you have torque sensors).
| t | pointer to the array that will store the output |
Implements yarp::dev::ITorqueControl.
Definition at line 2086 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get reference acceleration for a joint.
Returns the acceleration used to generate the trajectory profile.
| j | joint number |
| acc | pointer to storage for the return value |
Implements yarp::dev::IPositionControl.
Definition at line 1426 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get reference acceleration for a joint.
Returns the acceleration used to generate the trajectory profile.
| joints | pointer to the array of joint numbers |
| accs | pointer to the array that will store the acceleration values |
Implements yarp::dev::IPositionControl.
Definition at line 1438 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get reference acceleration of all joints.
These are the values used during the interpolation of the trajectory.
| accs | pointer to the array that will store the acceleration values. |
Implements yarp::dev::IPositionControl.
Definition at line 1451 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get reference speed for a joint.
Returns the speed used to generate the trajectory profile.
| j | joint number |
| ref | pointer to storage for the return value |
Implements yarp::dev::IPositionControl.
Definition at line 1389 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get reference speed of all joints.
These are the values used during the interpolation of the trajectory.
| joints | pointer to the array of joint numbers |
| spds | pointer to the array that will store the speed values. |
Implements yarp::dev::IPositionControl.
Definition at line 1401 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get reference speed of all joints.
These are the values used during the interpolation of the trajectory.
| spds | pointer to the array that will store the speed values. |
Implements yarp::dev::IPositionControl.
Definition at line 1414 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the software speed limits for a particular axis.
| axis | joint number |
| min | pointer to store the value of the lower limit |
| max | pointer to store the value of the upper limit |
Implements yarp::dev::IControlLimits.
Definition at line 1778 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
homingSingleJoint: call the homing procedure for a single joint
| j | joint to be calibrated |
Implements yarp::dev::IRemoteCalibrator.
Definition at line 2618 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
homingWholePart: call the homing procedure for a the whole part/device
Implements yarp::dev::IRemoteCalibrator.
Definition at line 2629 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
isCalibratorDevicePresent: check if a calibrator device has been set
Reimplemented from yarp::dev::IRemoteCalibrator.
Definition at line 2584 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Check is the joint brake is currently active.
| j | joint number |
| braked | is true if the joint is currently braked |
Implements yarp::dev::IJointBrake.
Definition at line 2960 of file ControlBoard_nwc_yarp.cpp.
|
protected |
Definition at line 103 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the current status (enabled/disabled) of the PID.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| enabled | the current status of the PID controller. |
Implements yarp::dev::IPidControl.
Definition at line 592 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Open the DeviceDriver.
| config | is a list of parameters for the device. Which parameters are effective for your device can vary. If there is no example for your device, you can run the "yarpdev" program with the verbose flag set to probe what parameters the device is checking. If that fails too, you'll need to read the source code (please nag one of the yarp developers to add documentation for your device). |
Reimplemented from yarp::dev::DeviceDriver.
Definition at line 120 of file ControlBoard_nwc_yarp.cpp.
|
delete |
|
delete |
|
overridevirtual |
Reimplemented from yarp::dev::IControlCalibration.
Definition at line 1855 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
parkSingleJoint(): start the parking procedure for the single joint
Implements yarp::dev::IRemoteCalibrator.
Definition at line 2640 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
parkWholePart: start the parking procedure for the whole part
Implements yarp::dev::IRemoteCalibrator.
Definition at line 2651 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set new reference point for all axes.
| refs | array, new reference points. |
Implements yarp::dev::IPositionControl.
Definition at line 1196 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set new reference point for a subset of joints.
| joints | pointer to the array of joint numbers |
| refs | pointer to the array specifying the new reference points |
Implements yarp::dev::IPositionControl.
Definition at line 1183 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set new reference point for a single axis.
| j | joint number |
| ref | specifies the new ref point |
Implements yarp::dev::IPositionControl.
Definition at line 1172 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
quitCalibrate: interrupt the calibration procedure
Implements yarp::dev::IRemoteCalibrator.
Definition at line 2662 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
quitPark: interrupt the park procedure
Implements yarp::dev::IRemoteCalibrator.
Definition at line 2673 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set relative position, all joints.
| deltas | pointer to the relative commands |
Implements yarp::dev::IPositionControl.
Definition at line 1269 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set relative position for a subset of joints.
| joints | pointer to the array of joint numbers |
| deltas | pointer to the array of relative commands |
Implements yarp::dev::IPositionControl.
Definition at line 1256 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set relative position.
The command is relative to the current position of the axis.
| j | joint axis number |
| delta | relative command |
Implements yarp::dev::IPositionControl.
Definition at line 1245 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Reset encoder, single joint.
Set the encoder value to zero
| j | encoder number |
Implements yarp::dev::IEncoders.
Definition at line 742 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Reset encoders.
Set the encoders value to zero
Implements yarp::dev::IEncoders.
Definition at line 753 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Reset motor encoder, single motor.
Set the encoder value to zero.
| m | motor number |
Implements yarp::dev::IMotorEncoders.
Definition at line 993 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Reset motor encoders.
Set the motor encoders value to zero.
Implements yarp::dev::IMotorEncoders.
Definition at line 1004 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Reset the controller of a given joint, usually sets the current status of the joint as the reference value for the PID, and resets the integrator.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
Implements yarp::dev::IPidControl.
Definition at line 559 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Enables/Disables the automatic joint brake.
If enabled, the firmware can automatically choose when to enable the joint brake (for example when the joint is in hardware_fault mode).
| j | joint number |
| enabled | true to enable the automatic joint brake |
Implements yarp::dev::IJointBrake.
Definition at line 2983 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Start calibration, this method is very often platform specific.
Implements yarp::dev::IControlCalibration.
Definition at line 1877 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the current control mode.
| j | joint number |
| mode | a vocab of the desired control mode for joint j. |
Implements yarp::dev::IControlMode.
Definition at line 2251 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the current control mode for a subset of axes.
| n_joints | how many joints this command is referring to |
| joints | list of joint numbers, the size of this array is n_joints |
| modes | array containing the new controlmodes, one value for each joint, the size is n_joints. The first value will be the new reference for the joint joints[0]. for example: n_joint 3 joints 0 2 4 modes VOCAB_CM_POSITION VOCAB_CM_VELOCITY VOCAB_CM_POSITION |
Implements yarp::dev::IControlMode.
Definition at line 2262 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the current control mode (multiple joints).
| modes | a vector containing vocabs for the desired control modes of the joints. |
Implements yarp::dev::IControlMode.
Definition at line 2273 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the value of the encoder for a given joint.
| j | encoder number |
| val | new value |
Implements yarp::dev::IEncoders.
Definition at line 764 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the value of all encoders.
| vals | pointer to the new values |
Implements yarp::dev::IEncoders.
Definition at line 775 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the gearbox ratio for a specific motor.
| m | motor number |
| gearbox | ratio to be set |
Implements yarp::dev::IMotor.
Definition at line 978 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set current impedance gains (stiffness,damping) for a specific joint.
Implements yarp::dev::IImpedanceControl.
Definition at line 2150 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set current force Offset for a specific joint.
Implements yarp::dev::IImpedanceControl.
Definition at line 2161 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the interaction mode of the robot, values can be stiff or compliant.
Please note that some robot may not implement certain types of interaction, so always check the return value.
| axis | joint number |
| mode | the desired interaction mode |
Implements yarp::dev::IInteractionMode.
Definition at line 2549 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the interaction mode of the robot for a set of joints, values can be stiff or compliant.
Please note that some robot may not implement certain types of interaction, so always check the return value.
| n_joints | how many joints this command is referring to |
| joints | list of joints controlled. The size of this array is n_joints |
| modes | array containing the desired interaction mode, one value for each joint, the size is n_joints. for example: n_joint 3 joints 0 2 4 refs VOCAB_IM_STIFF VOCAB_IM_STIFF VOCAB_IM_COMPLIANT |
Implements yarp::dev::IInteractionMode.
Definition at line 2560 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the interaction mode of the robot for a all the joints, values can be stiff or compliant.
Some robot may not implement some types of interaction, so always check the return value
| mode | array with the desired interaction mode for all joints, length is the total number of joints for the part |
Implements yarp::dev::IInteractionMode.
Definition at line 2570 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Enables/Disables manually the joint brake.
| j | joint number |
| active | true to enable the joint brake |
Implements yarp::dev::IJointBrake.
Definition at line 2972 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1626 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the value of the motor encoder for a given motor.
| m | motor number |
| val | new value |
Implements yarp::dev::IMotorEncoders.
Definition at line 1015 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Sets number of counts per revolution for motor encoder m.
| m | motor number |
| cpr | new value |
Implements yarp::dev::IMotorEncoders.
Definition at line 1026 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the value of all motor encoders.
| vals | pointer to the new values |
Implements yarp::dev::IMotorEncoders.
Definition at line 1049 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set a subset of motor parameters (bemf, ktau etc) useful for torque control.
| j | joint number |
| params | a struct containing the motor parameters to be set |
Implements yarp::dev::ITorqueControl.
Definition at line 2036 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1661 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1684 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set new PID value for a joint axis.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| pid | new PID value |
Implements yarp::dev::IPidControl.
Definition at line 394 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the error limit for the controller on a specific joint.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| limit | limit value |
Implements yarp::dev::IPidControl.
Definition at line 440 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Get the error limit for the controller on all joints.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| limits | pointer to the vector with the new limits |
Implements yarp::dev::IPidControl.
Definition at line 451 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the feedforward value for the specified PID controller.
This value will be multiplied by the PID feedforward gain.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| v | the feedforward value |
Implements yarp::dev::IPidControl.
Definition at line 659 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set an offset value for a given controller.
The value will added to the output of the PID controller
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| v | the offset value |
Implements yarp::dev::IPidControl.
Definition at line 628 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the controller reference for a given axis.
Warning this method can result in very large torques and should be used carefully. If you do not understand this warning you should avoid using this method. Have a look at other interfaces (e.g. position control).
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| j | joint number |
| ref | new reference point |
Implements yarp::dev::IPidControl.
Definition at line 417 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the controller reference, multiple axes.
Warning this method can result in very large torques and should be used carefully. If you do not understand this warning you should avoid using this method. Have a look at other interfaces (e.g. position control).
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| refs | pointer to the vector that contains the new reference points. |
Implements yarp::dev::IPidControl.
Definition at line 428 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set new PID value on multiple axes.
| pidtype | the id of the PID that will be affected by the command (e.g. position, velocity etc) |
| pids | pointer to a vector of pids |
Implements yarp::dev::IPidControl.
Definition at line 405 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set new position for a single axis.
| j | joint number |
| ref | specifies the new ref point |
Implements yarp::dev::IPositionDirect.
Definition at line 2288 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set new position for a set of axis.
| refs | specifies the new reference points |
Implements yarp::dev::IPositionDirect.
Definition at line 2354 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set new reference point for all axes.
| n_joint | how many joints this command is referring to |
| joints | list of joints controlled. The size of this array is n_joints |
| refs | array, new reference points, one value for each joint, the size is n_joints. The first value will be the new reference for the joint joints[0]. for example: n_joint 3 joints 0 2 4 refs 10 30 40 |
Implements yarp::dev::IPositionDirect.
Definition at line 2318 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the software limits for a particular axis, the behavior of the control card when these limits are exceeded, depends on the implementation.
| axis | joint number (why am I telling you this) |
| min | the value of the lower limit |
| max | the value of the upper limit |
Implements yarp::dev::IControlLimits.
Definition at line 1743 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IAmplifierControl.
Definition at line 1716 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the reference value of the current for a single motor.
| m | motor number |
| curr | the current reference value for motor m. Value is expressed in amperes. |
Implements yarp::dev::ICurrentControl.
Definition at line 2742 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the reference value of the currents for all motors.
| currs | the array containing the reference current values. Values are expressed in amperes. |
Implements yarp::dev::ICurrentControl.
Definition at line 2712 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the reference value of the current for a group of motors.
| n_motor | size of motors ans currs arrays |
| motors | pointer to the array containing the list of motor numbers |
| currs | pointer to the array specifying the new current references |
Implements yarp::dev::ICurrentControl.
Definition at line 2753 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Sets the reference dutycycle to a single motor.
| m | motor number |
| ref | the dutycycle, expressed as percentage (-100% +100%) |
Implements yarp::dev::IPWMControl.
Definition at line 2872 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Sets the reference dutycycle for all the motors.
| refs | the dutycycle, expressed as percentage (-100% +100%) |
Implements yarp::dev::IPWMControl.
Definition at line 2883 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the reference value of the torque for a given joint.
| j | joint number |
| t | new value |
Implements yarp::dev::ITorqueControl.
Definition at line 1968 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the reference value of the torque for all joints.
| t | pointer to the array of torque values |
Implements yarp::dev::ITorqueControl.
Definition at line 1935 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set new torque reference for a subset of joints.
| joints | pointer to the array of joint numbers |
| refs | pointer to the array specifying the new torque reference |
Implements yarp::dev::ITorqueControl.
Definition at line 2000 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the velocity of all joints.
| vels | vector containing joint velocities for all joints |
Implements yarp::dev::IVelocityDirect.
Definition at line 3050 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the velocity of a subset of joints.
| jnts | vector containing the ids of the joints to control. |
| vels | vector containing the joint velocities for the required subset. |
Implements yarp::dev::IVelocityDirect.
Definition at line 3081 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the velocity of single joint.
| jnt | joint number |
| vel | speed value |
Implements yarp::dev::IVelocityDirect.
Definition at line 3020 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Implements yarp::dev::IRemoteVariables.
Definition at line 883 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the temperature limit for a specific motor.
The specific behavior of the motor when the temperature limit is exceeded depends on the implementation (power off recommended)
| m | motor number |
| temp | the temperature limit to be set |
Implements yarp::dev::IMotor.
Definition at line 955 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set reference acceleration for a joint.
This value is used during the trajectory generation.
| j | joint number |
| acc | acceleration value |
Implements yarp::dev::IPositionControl.
Definition at line 1353 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set reference acceleration on all joints.
This is the value that is used during the generation of the trajectory.
| accs | pointer to the array of acceleration values |
Implements yarp::dev::IPositionControl.
Definition at line 1377 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set reference acceleration on all joints.
This is the value that is used during the generation of the trajectory.
| joints | pointer to the array of joint numbers |
| accs | pointer to the array with acceleration values |
Implements yarp::dev::IPositionControl.
Definition at line 1364 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set reference speed for a joint, this is the speed used during the interpolation of the trajectory.
| j | joint number |
| sp | speed value |
Implements yarp::dev::IPositionControl.
Definition at line 1317 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set reference speed on all joints.
These values are used during the interpolation of the trajectory.
| spds | pointer to the array of speed values. |
Implements yarp::dev::IPositionControl.
Definition at line 1341 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set reference speed on all joints.
These values are used during the interpolation of the trajectory.
| joints | pointer to the array of joint numbers |
| spds | pointer to the array with speed values. |
Implements yarp::dev::IPositionControl.
Definition at line 1328 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Set the software speed limits for a particular axis, the behavior of the control card when these limits are exceeded, depends on the implementation.
| axis | joint number |
| min | the value of the lower limit |
| max | the value of the upper limit |
Implements yarp::dev::IControlLimits.
Definition at line 1767 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Stop motion, multiple joints.
Implements yarp::dev::IPositionControl.
Definition at line 1486 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Stop motion for subset of joints.
| joints | pointer to the array of joint numbers |
Implements yarp::dev::IPositionControl.
Definition at line 1474 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Stop motion, single joint.
| j | joint number |
Implements yarp::dev::IPositionControl.
Definition at line 1463 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Start motion at a given speed, multiple joints.
| sp | pointer to the array containing the new speed values |
Implements yarp::dev::IVelocityControl.
Definition at line 1546 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Start motion at a given speed for a subset of joints.
| n_joint | how many joints this command is referring to |
| joints | of joints controlled. The size of this array is n_joints |
| spds | pointer to the array containing the new speed values, one value for each joint, the size of the array is n_joints. The first value will be the new reference for the joint joints[0]. for example: n_joint 3 joints 0 2 4 spds 10 30 40 |
Implements yarp::dev::IVelocityControl.
Definition at line 2425 of file ControlBoard_nwc_yarp.cpp.
|
overridevirtual |
Start motion at a given speed, single joint.
| j | joint number |
| sp | speed value |
Implements yarp::dev::IVelocityControl.
Definition at line 1516 of file ControlBoard_nwc_yarp.cpp.
|
protected |
Definition at line 88 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 84 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 85 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 97 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 98 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 99 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 100 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 93 of file ControlBoard_nwc_yarp.h.
|
mutableprotected |
Definition at line 102 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 103 of file ControlBoard_nwc_yarp.h.
Definition at line 104 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 106 of file ControlBoard_nwc_yarp.h.
|
protected |
Definition at line 86 of file ControlBoard_nwc_yarp.h.
Definition at line 90 of file ControlBoard_nwc_yarp.h.
Definition at line 89 of file ControlBoard_nwc_yarp.h.